Conbextra EP10 is a solvent free epoxy resin grout designed for grouting of gap widths of 0.25 to 10mm. It is an all liquid system consisting of base and hardener. The components are supplied in the correct mix proportions designed for whole pack mixing on site.

Technical details

Density	Approx 1050 kg/m3
Brand	Fosroc
Compressive Strength	57 N/mm2 @ 1 day, 66 N/mm2 @ 3 days, 93 N/mm2 @ 7 days
Pot Life Of Mix	90 min. @ 20 degree C, 40 min. @ 35 degree C
Packaging Size	1L, 4L
Shelf Life	12 months

Superior Load-Bearing Capacity

Conbextra EP10 ensures reliable performance in critical applications requiring high strength. Its robust compressive strength exceeds 90 N/mm at 7 days, making it suitable for heavy machinery and equipment foundations. Non-shrink properties and excellent bond strength offer stability under operational stresses, particularly in industrial-grade environments.

Effortless Application and Flow

Pre-measured packs provide a consistent epoxy mix with a pourable, self-leveling formula. The grout can be installed easily for gaps ranging from 10 mm to 60 mm, with a maximum flow distance of 1 meter at 25C for a 10 mm gap. Its pot life of around 60 minutes gives ample time for precise placement and adjustment during installation.

Unmatched Chemical and Oil Resistance

Engineered for durability, Conbextra EP10 exhibits exceptional resistance to oil, fuels, and a wide spectrum of chemicals, making it perfect for use in demanding industrial settings. It maintains integrity in environments exposed to vibration, heat, and harsh substances while retaining a smooth, corrosion-resistant finish.

FAQs of Fosroc Conbextra EP10:

Q: How is Fosroc Conbextra EP10 applied for precision grouting?

A: Conbextra EP10 is supplied as pre-weighed, three-component packs. Mix the resin and hardener, then gradually add the filler. Blend thoroughly until a homogeneous mixture forms. Pour the grout directly into the prepared gap, ensuring the substrate is clean and free from contaminants. The self-leveling nature ensures an even finish.

Q: What is the recommended usage for Fosroc Conbextra EP10?

A: This epoxy grout is ideal for precision grouting beneath machinery base plates, compressors, pumps, and structural supports. Its high strength and chemical resistance make it apt for equipment foundations in heavy-duty industrial environments requiring reliable load transfer and vibration resistance.

Q: When should Fosroc Conbextra EP10 be used during construction or installation?

A: Conbextra EP10 should be used after the machinery or equipment is properly positioned and alignment has been verified. The products 60-minute pot life at 20C allows installation teams to complete grouting in a single session while achieving maximum strength after seven days.

Q: Where can Fosroc Conbextra EP10 be installed for optimal performance?

A: Install Conbextra EP10 in areas requiring precision grouting under heavy loads, such as machine bases, pump foundations, and compressors located in factories, power plants, or industrial facilitiesespecially where chemical, oil, and vibration resistance are necessary.

Q: What are the primary benefits of using Fosroc Conbextra EP10?

A: Key benefits include high compressive and flexural strength, excellent flow, non-shrink properties, chemical and oil resistance, and vibration dampening. These attributes ensure long-term performance, reduced maintenance, and maximum equipment stability in industrial settings.

Q: How does the chemical resistance of Fosroc Conbextra EP10 support its durability?

A: The epoxy formulation provides outstanding resistance to oils, fuels, and most industrial chemicals, protecting grouted areas from deterioration and corrosion in demanding operational environments. This ensures the longevity of machinery foundations and structural supports.

Tell us about your requirement